Utilize a Pneumatic Forklift
You can often find pneumatic forklifts in warehouses and shipping operations. Also known as pump trucks or pallet trucks, they are used to move materials and products around on wooden pallets utilizing metal forks that are mounted on a wheeled counterweight. The counterweight has a pump which raises the forks off the ground. A pallet truck is designed to be operated by one individual.
To avoid loosing control while lifting heavy loads, pallet trucks must always be operated carefully. Equipment should be inspected before operating. Clear the wheels area of any obstructions. Make sure that the handle can turn smoothly. The pallet should be carefully stacked to ensure that nothing would fall off during transportation.
To release air in the pump and lower the forks, squeeze the lever located on the inside of the metal loop on the end of the pallet truck's handle. The forks can then be pushed into the slots of the pallet. The forks should be centered to guarantee even distribution of the pallet's weight across them. Lift the forks from the ground by pumping the handle of the pneumatic lift until the pallet has cleared the ground completely. Do not raise the pallet very high or the forklift could unbalance.
Move the pallet by pulling on the handle and then dragging it behind you. It is truly not safe to push the pallet in front of you as the momentum could cause it to go out of control. Slowly take turns and don't attempt to stop suddenly. Stop gradually, squeeze the lever, and the forks will lower to the ground. Lastly, remove the forks from the pallet by pulling them out. Return the pallet truck to its permanent place.