Forklift Battery Safe Installation and Charging
Batteries utilized in forklifts are pricey pieces of equipment which are pretty large weighing many pounds. The job of charging and installation of these batteries is something that should be really planned out in advanced so as to make certain that these methods could be done safely and correctly. Maintaining a sound charging procedure and proper handling could majorly increase the standard lifespan of a battery.
Standard Charging
It is recommended that the battery is not connected to the charger until it is at or less than 20 percent capacity. By charging the battery when it is more than 20 percent, the battery's lifespan could actually be shortened. On roughly each 5th charge cycle, the charger should be set on the equalize or weekend setting, depending on what type of charger you are using.
The charging cycle should never be interrupted. Once the charge cycle is complete, you should avoid utilizing the battery for a few hours. By practicing these methods, you can help make certain that you get the maximum battery performance available.
Charger Maintenance
Make certain the charger is turned off before hooking up the battery to the charger. You then could connect the charger to the battery. This is a common error which can accidentally cause damage to both the charger and the forklift. It is also really important that the battery amperage should match that of the charger.
The battery must never be allowed to to deep discharge or to completely discharge. This would ultimately shorten the lift of the battery and can even prevent the charger from being able to activate. If the battery charger reads that there is no battery activity, it will not start the charge cycle. If this situation happens, a technician should be called in order to re-set the charger prior to charge being able to start.