Change a Propane Tank
Forklifts powered by propane are common in warehouse environments. These forklifts have a propane mount situated at the back of the driver. These tanks need to be replaced from time to time as they have limited lifespans. Forklift drivers should always use caution when handling propane tanks. Compressed gases are very dangerous, particularly since the gas is flammable. Utilize care when replacing and removing propane tank to avoid being injured.
1 To change a propane tank, first stop the lift truck and leave the engine running, and turn the valve on the tank off. Let the lift truck run until the engine dies. This procedure burns the gas off in the transfer hose which connects the engine and the tank. Prior to taking the second steps, put on the correct safety equipment, such as insulated gloves made of either neoprene or leather. It is really important for you to protect your skin from contact with the compressed gas, which is extremely cold.
2 Disconnect the hose from the tank and take the holding straps off to remove the tank. When putting in a new tank, reattach the holding straps and reconnect the hose at the valve of the tank by tightening the nut.
3 Leaks could be checked simply by applying soapy water to the valve and opening it slightly. If there is a leak, it would cause bubbles to foam from around the valve. If this occurs, inspect the connection hose at the nut and the valve area. The connecting nut must be re-tightened if you detect any leaks in the area of the valve, and afterward perform the leak checking process once more. Persistent leaks mean that the connecting hose and nut should be replaced. Nevertheless, if replacing the nut and hose still does not stop the leak, the tank should be replaced.
4 Open the valve all the way to enable the gas to fill the connecting hose. Then you can start the lift truck and continue operating.