Mitsubishi outdoor lift trucks have gained the status of operating at peak performance. To be able to get the longest life possible from your equipment, you need to take good care of it and do frequent maintenance. If you take care of your forklift it would work in an optimum manner and as efficiently and safely as possible. The following suggestions below would really help you increase engine life and maintain engine performance.
Pre-Shift or Daily Inspections should be performed: By regularly inspecting all of the fluid levels within the engine, as well as the additional related things described within the forklift's Maintenance and Operation Manual, you will considerably maintain your machine's longevity and performance.
A Planned Maintenance Program or PM should be established and adhered to: A good planned maintenance program will closely follow the maintenance schedule of the engine that the manufacturer has set out. Several of the main things the planned maintenance program includes are regularly replacing the engine oil and appropriate filters.
Implementing an engine oil analysis program is also really beneficial. It can help to provide a completely detailed breakdown of all the materials which are present in the oil. For example, abnormally high amounts of silica or metals can indicate there might be a failed component inside of the engine. Additionally, these findings can indicate that the engine is ingesting dirty air. If all these problems are investigated and dealt with early, you would greatly help reduce repair expenses and increase the overall life of the engine.
Check and Change the Air Filter: Weak engine performance or poor fuel economy can be the outcome if you forget to periodically check and or replace the air filter in the engine. Like for example, engine life can be significantly reduced if you are operating with a restricted air filter which enables unfiltered and dirty air to be pulled into the engine.
The Cooling System has to be Checked: The life of an engine and its performance could be significantly affected by the cooling system. The engine is engineered and designed to work in a specific temperature range. Once that range is exceeded, damage may occur to the internal parts of the engine. Frequent maintenance needs to consist of replacing the engine coolant too. Failure to perform this kind of maintenance could result in damaged engine components, especially regarding any aluminum parts.