In the majority of cases, most individuals spend quite a bit of money buying their forklift. Thus, it is extremely important to take good care of it in order to protect your investment well into the long run. It is a great idea to know the procedures that are undertaken in maintaining and taking care of this machinery.
Amongst the best ways to tell how good the engine is working is by starting the lift truck up and listening carefully to see how it runs. Like for instance, if there are any knocks or misses, the machine is defective and this should raise several concerns. Furthermore listen carefully for any squealing sounds that come from the belts because these noises would provide you with a lot of information.
When carrying out maintenance, some of the main components you will have to pay attention to include the safety warning devices, horn, the lights, the gauges and the overhead guard. Any burnt out light bulbs or faulty parts must be replaced as soon as they are noticed. It is also imperative to inspect the wiring.
The battery compartment terminals must be cleaned when the above parts have been inspected carefully. If the terminals are not clean, be sure to clean them properly. Each battery cell must be checked in order to make sure that the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the equipment and after that change the filters. The fuel filters, hydraulic filter and the transmission filter need to be frequently replaced. Prior to fitting them, be sure to write the date on the new filters by using a permanent marker to be able to keep track.
When the oil change is finished and the filters have been replaced, a visual inspection of the drive axle has to be carried out. If there is a grease fitting on the axle make sure to apply some grease. Inspect the belts on the engine for any frays or cracks. If you find any, fix the problem accordingly. Then, inspect each and every other part of the equipment including the wheels. If any kind of fault or concern is detected, be sure to deal with it immediately so as to make certain the machinery is running at its safest and optimum levels.